mirror of
https://github.com/netfun2000/lcd4linux.git
synced 2026-02-27 09:44:34 +08:00
[lcd4linux @ 2005-06-09 17:41:47 by reinelt]
M50530 fixes (many thanks to Szymon Bieganski) git-svn-id: https://ssl.bulix.org/svn/lcd4linux/trunk@568 3ae390bd-cb1e-0410-b409-cd5a39f66f1f
This commit is contained in:
reinelt
+29
-26
@@ -1,4 +1,4 @@
|
||||
/* $Id: drv_HD44780.c,v 1.53 2005/06/01 11:17:54 pk_richman Exp $
|
||||
/* $Id: drv_HD44780.c,v 1.54 2005/06/09 17:41:47 reinelt Exp $
|
||||
*
|
||||
* new style driver for HD44780-based displays
|
||||
*
|
||||
@@ -32,6 +32,9 @@
|
||||
*
|
||||
*
|
||||
* $Log: drv_HD44780.c,v $
|
||||
* Revision 1.54 2005/06/09 17:41:47 reinelt
|
||||
* M50530 fixes (many thanks to Szymon Bieganski)
|
||||
*
|
||||
* Revision 1.53 2005/06/01 11:17:54 pk_richman
|
||||
* marked unused parameters
|
||||
*
|
||||
@@ -840,21 +843,21 @@ static void drv_HD_PP_stop(void)
|
||||
/****************************************/
|
||||
|
||||
/*
|
||||
DISCLAIMER!!!!
|
||||
|
||||
The following code is WORK IN PROGRESS, since it basicly 'works for us...'
|
||||
DISCLAIMER!!!!
|
||||
|
||||
(C) 2005 Paul Kamphuis & Luis Correia
|
||||
The following code is WORK IN PROGRESS, since it basicly 'works for us...'
|
||||
|
||||
We have removed all of the delays from this code, as the I2C bus is slow enough...
|
||||
(maximum possible speed is 100KHz only)
|
||||
(C) 2005 Paul Kamphuis & Luis Correia
|
||||
|
||||
*/
|
||||
We have removed all of the delays from this code, as the I2C bus is slow enough...
|
||||
(maximum possible speed is 100KHz only)
|
||||
|
||||
*/
|
||||
|
||||
static void drv_HD_I2C_nibble(unsigned char controller, unsigned char nibble)
|
||||
{
|
||||
unsigned char enable;
|
||||
unsigned char command; /* this is actually the first data byte on the PCF8574 */
|
||||
unsigned char command; /* this is actually the first data byte on the PCF8574 */
|
||||
unsigned char data_block[2];
|
||||
/* enable signal: 'controller' is a bitmask */
|
||||
/* bit n .. send to controller #n */
|
||||
@@ -870,24 +873,24 @@ static void drv_HD_I2C_nibble(unsigned char controller, unsigned char nibble)
|
||||
enable |= SIGNAL_ENABLE4;
|
||||
|
||||
/*
|
||||
The new method Paul Kamphuis has concocted places the 3 needed writes to the I2C device
|
||||
as a single operation, using the 'i2c_smbus_write_block_data' function.
|
||||
These actual writes are performed by putting the nibble along with the 'EN' signal.
|
||||
The new method Paul Kamphuis has concocted places the 3 needed writes to the I2C device
|
||||
as a single operation, using the 'i2c_smbus_write_block_data' function.
|
||||
These actual writes are performed by putting the nibble along with the 'EN' signal.
|
||||
|
||||
command = first byte to be written, which contains the nibble (DB0..DB3)
|
||||
data [0] = second byte to be written, which contains the nibble plus the EN signal
|
||||
data [1] = third byte to be written, which contains the nibble (DB0..DB3)
|
||||
command = first byte to be written, which contains the nibble (DB0..DB3)
|
||||
data [0] = second byte to be written, which contains the nibble plus the EN signal
|
||||
data [1] = third byte to be written, which contains the nibble (DB0..DB3)
|
||||
|
||||
Then we write the block as a whole.
|
||||
Then we write the block as a whole.
|
||||
|
||||
The main advantage we see is that we do 2 less IOCTL's from our driver.
|
||||
*/
|
||||
The main advantage we see is that we do 2 less IOCTL's from our driver.
|
||||
*/
|
||||
|
||||
command = nibble;
|
||||
command = nibble;
|
||||
data_block[0] = nibble | enable;
|
||||
data_block[1] = nibble;
|
||||
|
||||
drv_generic_i2c_command(command,data_block,2);
|
||||
drv_generic_i2c_command(command, data_block, 2);
|
||||
}
|
||||
|
||||
|
||||
@@ -899,14 +902,16 @@ static void drv_HD_I2C_byte(const unsigned char controller, const unsigned char
|
||||
}
|
||||
|
||||
|
||||
static void drv_HD_I2C_command(const unsigned char controller, const unsigned char cmd, __attribute__ ((unused))const int delay)
|
||||
static void drv_HD_I2C_command(const unsigned char controller, const unsigned char cmd, __attribute__ ((unused))
|
||||
const int delay)
|
||||
{
|
||||
/* send data with RS disabled */
|
||||
drv_HD_I2C_nibble(controller, ((cmd >> 4) & 0x0f));
|
||||
drv_HD_I2C_nibble(controller, ((cmd) & 0x0f));
|
||||
}
|
||||
|
||||
static void drv_HD_I2C_data(const unsigned char controller, const char *string, const int len, __attribute__ ((unused)) const int delay)
|
||||
static void drv_HD_I2C_data(const unsigned char controller, const char *string, const int len, __attribute__ ((unused))
|
||||
const int delay)
|
||||
{
|
||||
int l = len;
|
||||
|
||||
@@ -1168,8 +1173,7 @@ static int drv_HD_start(const char *section, const int quiet)
|
||||
info("%s: using model '%s'", Name, Models[Model].name);
|
||||
} else {
|
||||
error("%s: empty '%s.Model' entry from %s", Name, section, cfg_source());
|
||||
if (model)
|
||||
free(model);
|
||||
free(model);
|
||||
return -1;
|
||||
}
|
||||
free(model);
|
||||
@@ -1177,8 +1181,7 @@ static int drv_HD_start(const char *section, const int quiet)
|
||||
bus = cfg_get(section, "Bus", "parport");
|
||||
if (bus == NULL && *bus == '\0') {
|
||||
error("%s: empty '%s.Bus' entry from %s", Name, section, cfg_source());
|
||||
if (bus)
|
||||
free(bus);
|
||||
free(bus);
|
||||
return -1;
|
||||
}
|
||||
|
||||
|
||||
+279
-132
@@ -1,107 +1,110 @@
|
||||
# /* $Id: drv_M50530.c,v 1.18 2005/05/08 04:32:44 reinelt Exp $
|
||||
*
|
||||
* new style driver for M50530-based displays
|
||||
*
|
||||
* Copyright (C) 2003 Michael Reinelt <reinelt@eunet.at>
|
||||
* Copyright (C) 2004 The LCD4Linux Team <lcd4linux-devel@users.sourceforge.net>
|
||||
*
|
||||
* This file is part of LCD4Linux.
|
||||
*
|
||||
* LCD4Linux is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2, or (at your option)
|
||||
* any later version.
|
||||
*
|
||||
* LCD4Linux is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
*
|
||||
*
|
||||
* $Log: drv_M50530.c,v $
|
||||
* Revision 1.18 2005/05/08 04:32:44 reinelt
|
||||
* CodingStyle added and applied
|
||||
*
|
||||
* Revision 1.17 2005/05/05 08:36:12 reinelt
|
||||
* changed SELECT to SLCTIN
|
||||
*
|
||||
* Revision 1.16 2005/01/18 06:30:23 reinelt
|
||||
* added (C) to all copyright statements
|
||||
*
|
||||
* Revision 1.15 2005/01/06 16:54:53 reinelt
|
||||
* M50530 fixes
|
||||
*
|
||||
* Revision 1.14 2004/06/26 12:04:59 reinelt
|
||||
*
|
||||
* uh-oh... the last CVS log message messed up things a lot...
|
||||
*
|
||||
* Revision 1.13 2004/06/26 09:27:20 reinelt
|
||||
*
|
||||
* added '-W' to CFLAGS
|
||||
* changed all C++ comments to C ones
|
||||
* cleaned up a lot of signed/unsigned mistakes
|
||||
*
|
||||
* Revision 1.12 2004/06/20 10:09:54 reinelt
|
||||
*
|
||||
* 'const'ified the whole source
|
||||
*
|
||||
* Revision 1.11 2004/06/06 06:51:59 reinelt
|
||||
*
|
||||
* do not display end splash screen if quiet=1
|
||||
*
|
||||
* Revision 1.10 2004/06/05 06:41:39 reinelt
|
||||
*
|
||||
* chancged splash screen again
|
||||
*
|
||||
* Revision 1.9 2004/06/05 06:13:12 reinelt
|
||||
*
|
||||
* splash screen for all text-based display drivers
|
||||
*
|
||||
* Revision 1.8 2004/06/02 09:41:19 reinelt
|
||||
*
|
||||
* prepared support for startup splash screen
|
||||
*
|
||||
* Revision 1.7 2004/06/01 06:45:29 reinelt
|
||||
*
|
||||
* some Fixme's processed
|
||||
* documented some code
|
||||
*
|
||||
* Revision 1.6 2004/05/31 05:38:02 reinelt
|
||||
*
|
||||
* fixed possible bugs with user-defined chars (clear high bits)
|
||||
* thanks to Andy Baxter for debugging the MilfordInstruments driver!
|
||||
*
|
||||
* Revision 1.5 2004/05/29 15:53:28 reinelt
|
||||
*
|
||||
* M50530: reset parport signals on exit
|
||||
* plugin_ppp: ppp() has two parameters, not three
|
||||
* lcd4linux.conf.sample: diskstats() corrected
|
||||
*
|
||||
* Revision 1.4 2004/05/26 11:37:36 reinelt
|
||||
*
|
||||
* Curses driver ported.
|
||||
*
|
||||
* Revision 1.3 2004/03/19 09:17:46 reinelt
|
||||
*
|
||||
* removed the extra 'goto' function, row and col are additional parameters
|
||||
* of the write() function now.
|
||||
*
|
||||
* Revision 1.2 2004/02/15 21:43:43 reinelt
|
||||
* T6963 driver nearly finished
|
||||
* framework for graphic displays done
|
||||
* i2c_sensors patch from Xavier
|
||||
* some more old generation files removed
|
||||
*
|
||||
* Revision 1.1 2004/02/15 08:22:47 reinelt
|
||||
* ported USBLCD driver to NextGeneration
|
||||
* added drv_M50530.c (I forgot yesterday, sorry)
|
||||
* removed old drivers M50530.c and USBLCD.c
|
||||
*
|
||||
*/
|
||||
/* $Id: drv_M50530.c,v 1.19 2005/06/09 17:41:47 reinelt Exp $
|
||||
*
|
||||
* new style driver for M50530-based displays
|
||||
*
|
||||
* Copyright (C) 2003 Michael Reinelt <reinelt@eunet.at>
|
||||
* Copyright (C) 2004 The LCD4Linux Team <lcd4linux-devel@users.sourceforge.net>
|
||||
*
|
||||
* This file is part of LCD4Linux.
|
||||
*
|
||||
* LCD4Linux is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2, or (at your option)
|
||||
* any later version.
|
||||
*
|
||||
* LCD4Linux is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
*
|
||||
*
|
||||
* $Log: drv_M50530.c,v $
|
||||
* Revision 1.19 2005/06/09 17:41:47 reinelt
|
||||
* M50530 fixes (many thanks to Szymon Bieganski)
|
||||
*
|
||||
* Revision 1.18 2005/05/08 04:32:44 reinelt
|
||||
* CodingStyle added and applied
|
||||
*
|
||||
* Revision 1.17 2005/05/05 08:36:12 reinelt
|
||||
* changed SELECT to SLCTIN
|
||||
*
|
||||
* Revision 1.16 2005/01/18 06:30:23 reinelt
|
||||
* added (C) to all copyright statements
|
||||
*
|
||||
* Revision 1.15 2005/01/06 16:54:53 reinelt
|
||||
* M50530 fixes
|
||||
*
|
||||
* Revision 1.14 2004/06/26 12:04:59 reinelt
|
||||
*
|
||||
* uh-oh... the last CVS log message messed up things a lot...
|
||||
*
|
||||
* Revision 1.13 2004/06/26 09:27:20 reinelt
|
||||
*
|
||||
* added '-W' to CFLAGS
|
||||
* changed all C++ comments to C ones
|
||||
* cleaned up a lot of signed/unsigned mistakes
|
||||
*
|
||||
* Revision 1.12 2004/06/20 10:09:54 reinelt
|
||||
*
|
||||
* 'const'ified the whole source
|
||||
*
|
||||
* Revision 1.11 2004/06/06 06:51:59 reinelt
|
||||
*
|
||||
* do not display end splash screen if quiet=1
|
||||
*
|
||||
* Revision 1.10 2004/06/05 06:41:39 reinelt
|
||||
*
|
||||
* chancged splash screen again
|
||||
*
|
||||
* Revision 1.9 2004/06/05 06:13:12 reinelt
|
||||
*
|
||||
* splash screen for all text-based display drivers
|
||||
*
|
||||
* Revision 1.8 2004/06/02 09:41:19 reinelt
|
||||
*
|
||||
* prepared support for startup splash screen
|
||||
*
|
||||
* Revision 1.7 2004/06/01 06:45:29 reinelt
|
||||
*
|
||||
* some Fixme's processed
|
||||
* documented some code
|
||||
*
|
||||
* Revision 1.6 2004/05/31 05:38:02 reinelt
|
||||
*
|
||||
* fixed possible bugs with user-defined chars (clear high bits)
|
||||
* thanks to Andy Baxter for debugging the MilfordInstruments driver!
|
||||
*
|
||||
* Revision 1.5 2004/05/29 15:53:28 reinelt
|
||||
*
|
||||
* M50530: reset parport signals on exit
|
||||
* plugin_ppp: ppp() has two parameters, not three
|
||||
* lcd4linux.conf.sample: diskstats() corrected
|
||||
*
|
||||
* Revision 1.4 2004/05/26 11:37:36 reinelt
|
||||
*
|
||||
* Curses driver ported.
|
||||
*
|
||||
* Revision 1.3 2004/03/19 09:17:46 reinelt
|
||||
*
|
||||
* removed the extra 'goto' function, row and col are additional parameters
|
||||
* of the write() function now.
|
||||
*
|
||||
* Revision 1.2 2004/02/15 21:43:43 reinelt
|
||||
* T6963 driver nearly finished
|
||||
* framework for graphic displays done
|
||||
* i2c_sensors patch from Xavier
|
||||
* some more old generation files removed
|
||||
*
|
||||
* Revision 1.1 2004/02/15 08:22:47 reinelt
|
||||
* ported USBLCD driver to NextGeneration
|
||||
* added drv_M50530.c (I forgot yesterday, sorry)
|
||||
* removed old drivers M50530.c and USBLCD.c
|
||||
*
|
||||
*/
|
||||
|
||||
/*
|
||||
*
|
||||
@@ -144,6 +147,10 @@ static unsigned char SIGNAL_IOC1;
|
||||
static unsigned char SIGNAL_IOC2;
|
||||
static unsigned char SIGNAL_GPO;
|
||||
|
||||
static int FONT5X11;
|
||||
static int DDRAM;
|
||||
static int DUTY;
|
||||
|
||||
/* Fixme: GPO's not yet implemented */
|
||||
static int GPOS;
|
||||
/* static int GPO=0; */
|
||||
@@ -200,9 +207,12 @@ static void drv_M5_write(const int row, const int col, const char *data, const i
|
||||
unsigned int cmd;
|
||||
unsigned int pos;
|
||||
|
||||
pos = row * 48 + col;
|
||||
if (row > 3)
|
||||
pos -= 168;
|
||||
if (row < 4) {
|
||||
pos = row * (DDRAM >> DUTY) + col;
|
||||
} else {
|
||||
pos = (row - 4) * (DDRAM >> DUTY) + (DDRAM >> DUTY) / 2 + col;
|
||||
}
|
||||
|
||||
drv_M5_command(0x300 | pos, 20);
|
||||
|
||||
while (l--) {
|
||||
@@ -216,11 +226,9 @@ static void drv_M5_defchar(const int ascii, const unsigned char *matrix)
|
||||
{
|
||||
int i;
|
||||
|
||||
drv_M5_command(0x300 + 192 + 8 * (ascii - CHAR0), 20);
|
||||
drv_M5_command(0x300 + DDRAM + 8 * (ascii - CHAR0), 20);
|
||||
|
||||
/* Fixme: looks like the M50530 cannot control the bottom line */
|
||||
/* therefore we have only 7 bytes here */
|
||||
for (i = 0; i < 7; i++) {
|
||||
for (i = 0; i < YRES; i++) {
|
||||
drv_M5_command(0x200 | (matrix[i] & 0x3f), 20);
|
||||
}
|
||||
}
|
||||
@@ -248,44 +256,96 @@ static void drv_M5_setGPO(const int bits)
|
||||
|
||||
static int drv_M5_start(const char *section, const int quiet)
|
||||
{
|
||||
char *model, *s;
|
||||
int rows = -1, cols = -1, gpos = -1;
|
||||
char *s;
|
||||
int n;
|
||||
int rows = -1, cols = -1;
|
||||
unsigned int SF;
|
||||
|
||||
model = cfg_get(section, "Model", "generic");
|
||||
if (model != NULL && *model != '\0') {
|
||||
s = cfg_get(section, "Model", "generic");
|
||||
if (s != NULL && *s != '\0') {
|
||||
int i;
|
||||
for (i = 0; Models[i].type != 0xff; i++) {
|
||||
if (strcasecmp(Models[i].name, model) == 0)
|
||||
if (strcasecmp(Models[i].name, s) == 0)
|
||||
break;
|
||||
}
|
||||
free(s);
|
||||
if (Models[i].type == 0xff) {
|
||||
error("%s: %s.Model '%s' is unknown from %s", Name, section, model, cfg_source());
|
||||
error("%s: %s.Model '%s' is unknown from %s", Name, section, s, cfg_source());
|
||||
return -1;
|
||||
}
|
||||
Model = i;
|
||||
info("%s: using model '%s'", Name, Models[Model].name);
|
||||
} else {
|
||||
error("%s: empty '%s.Model' entry from %s", Name, section, cfg_source());
|
||||
free(s);
|
||||
return -1;
|
||||
}
|
||||
|
||||
s = cfg_get(section, "Size", NULL);
|
||||
if (s == NULL || *s == '\0') {
|
||||
error("%s: no '%s.Size' entry from %s", Name, section, cfg_source());
|
||||
free(s);
|
||||
return -1;
|
||||
}
|
||||
if (sscanf(s, "%dx%d", &cols, &rows) != 2 || rows < 1 || cols < 1) {
|
||||
error("%s: bad size '%s'", Name, s);
|
||||
error("%s: bad %s.Size '%s' from %s", Name, section, s, cfg_source());
|
||||
free(s);
|
||||
return -1;
|
||||
}
|
||||
|
||||
if (cfg_number(section, "GPOs", 0, 0, 8, &gpos) < 0)
|
||||
return -1;
|
||||
info("%s: controlling %d GPO's", Name, gpos);
|
||||
|
||||
free(s);
|
||||
DROWS = rows;
|
||||
DCOLS = cols;
|
||||
GPOS = gpos;
|
||||
|
||||
s = cfg_get(section, "Font", "5x7");
|
||||
if (s == NULL && *s == '\0') {
|
||||
error("%s: empty '%s.Font' entry from %s", Name, section, cfg_source());
|
||||
free(s);
|
||||
return -1;
|
||||
}
|
||||
if (strcasecmp(s, "5x7") == 0) {
|
||||
XRES = 5;
|
||||
YRES = 7;
|
||||
FONT5X11 = 0;
|
||||
} else if (strcasecmp(s, "5x11") == 0) {
|
||||
XRES = 5;
|
||||
YRES = 11;
|
||||
FONT5X11 = 1;
|
||||
} else {
|
||||
error("%s: bad '%s.Font' entry '%s' from %s", Name, section, s, cfg_source());
|
||||
error("%s: should be '5x7' or '5x11'", Name);
|
||||
free(s);
|
||||
return -1;
|
||||
}
|
||||
free(s);
|
||||
|
||||
|
||||
if (DCOLS * DROWS > 256) {
|
||||
error("%s: %s.Size '%dx%d' is too big, would require %d bytes", Name, section, DCOLS, DROWS, DCOLS * DROWS, cfg_source());
|
||||
return -1;
|
||||
} else if (DCOLS * DROWS > 224) {
|
||||
DDRAM = 256;
|
||||
CHARS = 0;
|
||||
} else if (DCOLS * DROWS > 192) {
|
||||
DDRAM = 224;
|
||||
CHARS = FONT5X11 ? 2 : 4;
|
||||
} else if (DCOLS * DROWS > 160) {
|
||||
DDRAM = 192;
|
||||
CHARS = FONT5X11 ? 4 : 8;
|
||||
} else {
|
||||
DDRAM = 160;
|
||||
CHARS = FONT5X11 ? 6 : 12;
|
||||
}
|
||||
info("%s: using %d words DDRAM / %d words CGRAM (%d user chars)", Name, DDRAM, 256 - DDRAM, CHARS);
|
||||
|
||||
if (cfg_number(section, "DUTY", 2, 0, 2, &DUTY) < 0)
|
||||
return -1;
|
||||
info("%s: using duty %d: 1/%d, %d lines x %d words", Name, DUTY, (XRES + 1) << DUTY, 1 << DUTY, DDRAM >> DUTY);
|
||||
|
||||
|
||||
if (cfg_number(section, "GPOs", 0, 0, 8, &n) < 0)
|
||||
return -1;
|
||||
GPOS = n;
|
||||
info("%s: controlling %d GPO's", Name, GPOS);
|
||||
|
||||
if (drv_generic_parport_open(section, Name) != 0) {
|
||||
error("%s: could not initialize parallel port!", Name);
|
||||
@@ -304,16 +364,103 @@ static int drv_M5_start(const char *section, const int quiet)
|
||||
/* clear all signals */
|
||||
drv_generic_parport_control(SIGNAL_EX | SIGNAL_IOC1 | SIGNAL_IOC2 | SIGNAL_GPO, 0);
|
||||
|
||||
/* for any mysterious reason, this delay is necessary... */
|
||||
/* for some mysterious reason, this delay is necessary... */
|
||||
udelay(2000);
|
||||
|
||||
/* set direction: write */
|
||||
drv_generic_parport_direction(0);
|
||||
|
||||
drv_M5_command(0x00FA, 20); /* set function mode */
|
||||
drv_M5_command(0x0020, 20); /* set display mode */
|
||||
drv_M5_command(0x0050, 20); /* set entry mode */
|
||||
drv_M5_command(0x0030, 20); /* set display mode */
|
||||
|
||||
/* set function (SF) mode:
|
||||
* Bit 0 : RAM 0
|
||||
* Bit 1 : RAM 1
|
||||
* Bit 2 : DUTY 0
|
||||
* Bit 3 : DUTY 1
|
||||
* Bit 4 : FONT: 0 = 5x12, 1 = 5x8
|
||||
* Bit 5 : I/O: 0 = 4-bit, 1 = 8-bit
|
||||
* Bit 6 : 1
|
||||
* Bit 7 : 1
|
||||
*
|
||||
* RAM layout:
|
||||
* 00: 256 words DDRAM, 0 words CGRAM
|
||||
* 01: 224 words DDRAM, 32 words CGRAM
|
||||
* 10: 192 words DDRAM, 64 words CGRAM
|
||||
* 11: 160 words DDRAM, 96 words CGRAM
|
||||
*
|
||||
* Duty:
|
||||
* 00: 1/8 (1/12 for 5x11), 1 line
|
||||
* 00: 1/16 (1/24 for 5x11), 2 lines
|
||||
* 00: 1/32 (1/48 for 5x11), 4 lines
|
||||
* 11: undefined
|
||||
*/
|
||||
|
||||
/* 11100000 : SF, 8-bit mode */
|
||||
SF = 0xE0;
|
||||
|
||||
/* RAM layout */
|
||||
switch (DDRAM) {
|
||||
case 160:
|
||||
SF |= 0x03;
|
||||
break;
|
||||
case 192:
|
||||
SF |= 0x02;
|
||||
break;
|
||||
case 224:
|
||||
SF |= 0x01;
|
||||
break;
|
||||
case 256:
|
||||
SF |= 0x00;
|
||||
break;
|
||||
}
|
||||
|
||||
/* Duty */
|
||||
SF |= (DUTY << 2);
|
||||
|
||||
/* Font */
|
||||
SF |= (!FONT5X11) << 4;
|
||||
|
||||
|
||||
debug("SET FUNCTION MODE 0x%02x", SF);
|
||||
drv_M5_command(SF, 20);
|
||||
|
||||
|
||||
/* set display (SD) mode:
|
||||
* Bit 0 : 1 = turn on character blinking
|
||||
* Bit 0 : 1 = turn on cursor blinking
|
||||
* Bit 0 : 1 = turn on underline display
|
||||
* Bit 0 : 1 = turn on cursor
|
||||
* Bit 0 : 1 = turn on display
|
||||
* Bit 0 : 1
|
||||
* Bit 0 : 0
|
||||
* Bit 0 : 0
|
||||
*/
|
||||
|
||||
/* SD: 0x20 = 00100000 */
|
||||
/* SD: turn off display */
|
||||
drv_M5_command(0x0020, 20);
|
||||
|
||||
|
||||
/* set entry (SE) mode:
|
||||
* Bit 0 : 1 = inc/dec cursor address after Read
|
||||
* Bit 1 : 1 = inc/dec cursor address after Write
|
||||
* Bit 2 : 0 = inc, 1 = dec
|
||||
* Bit 3 : 1 = inc/dec display start addr after Read
|
||||
* Bit 4 : 1 = inc/dec display start addr after Write
|
||||
* Bit 5 : 0 = inc, 1 = dec
|
||||
* Bit 6 : 1
|
||||
* Bit 7 : 0
|
||||
*
|
||||
*/
|
||||
|
||||
/* SE: 0x50 = 01010000 */
|
||||
/* SE: increment display start after Write */
|
||||
drv_M5_command(0x0050, 20);
|
||||
|
||||
|
||||
/* SD: 0x30 = 00110000 */
|
||||
/* SD: turn on display */
|
||||
drv_M5_command(0x0030, 20);
|
||||
|
||||
|
||||
drv_M5_clear();
|
||||
|
||||
@@ -370,9 +517,9 @@ int drv_M5_init(const char *section, const int quiet)
|
||||
int ret;
|
||||
|
||||
/* display preferences */
|
||||
XRES = 5; /* pixel width of one char */
|
||||
YRES = 8; /* pixel height of one char */
|
||||
CHARS = 8; /* number of user-defineable characters */
|
||||
XRES = -1; /* pixel width of one char */
|
||||
YRES = -1; /* pixel height of one char */
|
||||
CHARS = 0; /* number of user-defineable characters */
|
||||
CHAR0 = 248; /* ASCII of first user-defineable char */
|
||||
GOTO_COST = 1; /* number of bytes a goto command requires */
|
||||
|
||||
|
||||
@@ -195,9 +195,11 @@ Display SimpleLCD {
|
||||
|
||||
Display M50530-24x8 {
|
||||
Driver 'M50530'
|
||||
Port '/dev/parport0'
|
||||
Port '/dev/parports/0'
|
||||
# Port '0x378'
|
||||
Size '24x8'
|
||||
Font '5x7'
|
||||
Duty 2
|
||||
Wire.EX 'STROBE'
|
||||
Wire.IOC1 'SLCTIN'
|
||||
Wire.IOC2 'AUTOFD'
|
||||
@@ -761,10 +763,10 @@ Layout testMySQL {
|
||||
#Display 'CF632'
|
||||
#Display 'CF633'
|
||||
#Display 'Curses'
|
||||
#Display 'M50530-24x8'
|
||||
Display 'M50530-24x8'
|
||||
#Display 'LCDTerm'
|
||||
#Display 'CT20x4'
|
||||
Display 'T6963-240x64'
|
||||
#Display 'T6963-240x64'
|
||||
#Display 'XWindow'
|
||||
#Display 'USBLCD'
|
||||
#Display 'BWCT'
|
||||
|
||||
Reference in New Issue
Block a user